Complete Guide On Wavlink AC1200 Setup

The Wavlink AC1200 wireless router offers fast speeds and reliable connections for multiple devices. It has two high-gain antennas to ensure a wide coverage area and stable connection. It also comes with a USB port for easy access to shared files. It is compatible with most wireless devices and is easy to set up and use. It also has a parental control feature to keep your children safe online. There is need to use the best method for Wavlink AC1200 Setup.

 

You can easily complete Wavlink AC 1200 setup. Here we can discuss the whole process of setup so you can easily complete the setup and use them quickly. Make sure to carry out all steps as instructed. 

 

 WPS Method To Wavlink AC1200 Setup 

It is imperative to know the process of Wavlink AC1200 setup. Here you can check the WPS method of setup.

  • You can connect your extender’s power adapter to a power outlet.
  • Make sure all wires are insulated.
  • A blue light indicates that the extender is powered on.
  • You can connect your WiFi router to the Wavlink extender.
  • Press the WPS button on both the router and the extender simultaneously.
  • For this step, both buttons need to be pressed together for two minutes.
  • Make sure the LED light is solid blue.
  • A solid blue LED indicates that the router and extender are both connected.
  • Extenders automatically boost wireless networks when they are connected. For both devices, the SSID and password will remain the same.
  • Using the same password, you will be able to log in.
  • After completing the Wavlink AC1200 setup process, you can use your device properly.

 

Using a Web Browser for Wavlink AC1200 Setup 

You can also use a web browser for the Wavlink AC1200 setup. It also depends on you as to which method you want to adopt. Let’s check out these steps for setup.

 

  • You will need to connect your Wavlink AC1200 device to the power outlet.
  • To repeat the connection, you will need to configure your device.
  • Navigate to the network settings on your laptop.
  • Connect to Wavlink N by finding the network. 
  • You can launch any web browser you choose and type 192.168.10.1 into the address bar.
  • A configuration page for the Wavlink AC1200 will appear.
  • You can now connect your home’s network to the extender by following the instructions on the screen.

Now you can quickly use your Wavlink AC1200 setup. 

 

Reset Method for Wavlink AC1200 Setup 

Often, customers ask what the password is for their Wavlink AC1200 extenders. If you have not changed the password settings of your extender, you can use the default credentials. Passwords and usernames are both set to “admin” by default.

 

When setting up their Wavlink AC1200, users often customize the password for their extender by logging into the configuration page. After they have written down this password, they forget it or lose the paper on which it was written. The most effective way is to reset your extender and log in again with default credentials. 

 

Whenever we need to reset a router or extender, there are two ways to do so. There are two types of resets: hard and soft. You can perform a soft reset by logging into the extender’s admin page.

 

 Hard resets can be performed directly on the extender. To perform a hard reset, you need to press and hold the reset button for 10-20 seconds. This will reset the extender to its factory settings. After the reset, you can set up the extender again.

 

When the extender’s factory settings need to be reset, there are a few circumstances that require this. When all other troubleshooting attempts fail, this is usually the last way to solve the issue. 

 

  • When users forget their extender admin password.
  • Your wifi router’s password is changed.
  • Changing the router requires reconfiguring it.
  • Extenders that keep disconnecting from wireless networks.

 

Soft Reset of the Wavlink AC1200 Extender

You can use the soft reset for your Wavlink AC1200 extender. 

  • You will need to attach your extender to the power outlet.
  • To connect to a laptop or desktop, either use WiFi or a LAN cable.
  • WiFi is also available for connecting your phone or tablet to the extender.
  • Open your device’s browser and type http://192.168.10.1 into the address bar.
  • After entering the default credentials, you will be redirected to the login page.
  • Use the new password if you’ve changed it.
  • Go to the Save/Reload Settings page after you have logged in. 
  • There is a need to reload the settings of your device to default mode to restore the factory configuration.

After this, you will need to start the login process again.

 

 Hard Reset of the Wavlink AC1200 Extender

You can also hard reset your Wavlink AC1200 extender, so follow the below steps. It takes a few minutes to complete the process. 

  • To power your extender, connect it to an electrical outlet.
  • There is a small reset button on the back of the extender.
  • For ten seconds, press and release the reset button with a needle or paperclip.
  • There will be a flashing of LED lights followed by a reboot of the extender.
  • A flashing light indicates that the rest of the process is completed and the factory default settings are applied.

 

Final Words 

It is a simple process of Wavlink AC1200 setup, so you can quickly complete the process. There is a need to use the WPS method or web browser for the setup process. It depends on you as to which method you want to adopt.