• Disclaimer

    Disclaimer: wireless-extender-setups provides assistance for various issues related to Range extenders and wifi devices on this website. We have no direct or indirect alliance with any third-party organization. Any image, brand name, products, trademarks and logo used is for referential purpose only.

    • Netgear Wifi Extender Setup

    New Netgear Wifi Extender Setup

    Have you ever found difficulty in the Netgear Wifi Extender Setup? If the answer to this question is yes, then no need to worry. Here we will provide you with a step-by-step guide for doing the same.

    Netgear WiFi extender is a smart device that expands the home WiFi network by connecting to the existing network and also enhances its coverage. WiFi range extender plays a very important role in day-to-day life if you are working on the internet. 

    If all your work depends on the wireless network, then setting up the Netgear WiFi extender is a great option. Sometimes, the router is unable to access a proper wireless connection, from the location where the router is placed, 

    Nowadays, every person wants a high-speed internet connection to access things very fast. So, if you are looking for longer wireless connectivity, then the WiFi extender is the best option.

    The Netgear Wifi extender probably extends the wireless signal length and durability and boosts the signal strength of the wireless. But there are many users who don’t know how to Netgear Wifi Extender Setup. 

    If you are also one of those, who just bought the WiFi range extender, but are unable to set it up. This might leave you scratching your head, and wondering how to Netgear Extender Setup. 

    Well, there is no more need to get upset, as here we will provide you with a comprehensive guide that will assist you with the same. Doing this isn’t a complicated task, it is more simpler than you think. 

    Steps for Netgear Wifi Extender Setup Via the WPS 

    Connecting the WiFi extender to the primary router is a quite simple and easy task. Setting up the WiFi extender through the WPS button is one of the easiest for doing the same. So, to do the same all you have to do is go through the following step-by-step guide. 

    1. Setup the WiFi Extender

    Firstly, plug in the WiFi extender in the power outlet, and make sure that it is close to the router or at least in the same room. Once you complete the setup, you can move it to the desired location.

    After plugging the device, the LED light on it will turn green. If it is not, then simply press the on/ off button to turn it on. 

    2. Press the WPS Button

    Now when the LED is stable, find the WPS button on the side of the extender. Once found, press the button once, and the LED light will start blinking.

    After that, press the same button on the router as well. While the router and the extender make a connection, the WPS light on the extender will turn green.

    If in case, your router sustains 5GHZ, then you also need to extend the band as well. For this simply press the WPS button on the extender again, and also on the router as well. 

    3. Position the Netgear WiFi Extender

    Once you have successfully set up the WiFi extender, now it is time to place the router in the desired location. It is recommended to place it halfway between the router, and the poor WiFi area. 

    If you have placed both devices in the same room, then unplug the extender and plug it into the new location. While placing it ensure that it is within the range of the wireless router so that it can receive adequate signal. 

    4. Check the LED Lights

    As of now, you have placed the device in the desired location. Now you should check the LED light behavior, to see whether it is connected properly or not. 

    According to the model you have, you will be able to see the light that looks like a router, or 2GHz or 5GHz. If the lights are green or amber in color, then it has a good connection with the router. 

    And if the color of the LED light is red, then you need to move the extender close to the router, until the red light disappears.

    Guide for Netgear WiFi Extender Setup without WPS

    If your netgear wifi extender does not have a WPS button, then you can also set up the extender as well. If you don’t know how to do this, then the following instructions will help you in doing the same. Here is how to netgear wifi extender setup without wps. 

    1. Connect Antennas to the Router

    If you are setting up the desktop extender, then you have to attach the antennas. For the wall extender, the antennas are already connected, you just need to point them upward.

    Make sure that the initial setup of the WiFi extender and the wireless router are in the same room. Once set up completely, you can move them to the preferred location.

    You should use this method, only if your router does not sustain WPS. To find out whether your device supports WPS or not, simply look for a button named WPS.

    2. Plug the WiFi Extender into the Power Outlet

    For the desktop extender use the power cord that comes in the box to plug it into the power source. And if you have a wall extender, then simply plug it directly into the wall outlet.

    After plugging the device into the power source outlet. If the Power LED light does not turn on you must simply press the on/off button to turn on the extender. 

    3. Connect the Computer to the Extender

    Once the Netgear WiFi extender gets turned, then for Netgear Wifi Extender Setup, you need to connect your device to the computer. To do this, all you need to do is disconnect the computer from the existing WiFi network.

    After disconnecting, you have to connect the same device to the one called NETGEAR_EXT. In this, you also don’t have to fill in any password.

    4. Launch the Installation Assistance 

    After connecting the computer to the extender, you have to visit https://www.mywifiext.net to open the installation assistance. This step will only be going to work properly, only when you are connected to the NETGEAR_EXT wireless network.

    5. Enter the Wireless Network Password

    Now choose your wireless network and click on Next. If in case, your router sustains both 2GHz and 5GHz bands, then you have to choose any one of them.

    After that, you have to enter your wireless network password and then click on Next. The password is that which you have used while connecting the computer or any other gadget.

    If you have a dual-band WiFi extender setup, then need to fill in the password into the blanks for both ends. 

    6. Connect the WiFi Extender to the Router

    Once you have successfully made the connection, proceed further by clicking on next. Now at the bottom of the screen, the name of your network name and the phrase “Same as Existing Network” will display. 

    Now the WiFi extender will get connected to the router. After that, to complete the setup process, simply click on Continue. Once Netgear Extender Setup is completed, then you can close your browser window.

    7. Place your Netgear WiFi Extender

    Once you have successfully set up the extender, it is time to place it properly. You should place it halfway between the router and the area where the WiFi connection is poor. 

    If you have placed both devices in the same room, then unplug the router and plug it at a new location. Also, make sure that you place the extender within the range of the router. 

    Netgear Wifi Extender Setup Without Ethernet Port

    All the WiFi extenders are not the same, some devices don’t have an ethernet port in them. Below are the instructions for how to set up the Netgear WiFi extender manually, as it does not have an ethernet port.

    • First, factory reset the extender, and connect it to the extender using a WiFi connection.
    • Then you have to log in to the web user interface of your device. 
    • After that, you will be driven to enter the extender login credentials, i.e., username and password.
    • Now you have to obey the instructions for the installation wizard and establish a connection with the router.
    • Once done successfully, you can connect your WiFi-compatible devices. 

    Steps to Clear the 2.4 GHz Wi-Fi Network

    If you don’t want to extend the WiFi band, then you can also clear the 2.4GHz WiFi network. The following are the steps for clearing the WiFi network.

    • For this, first, you have to change your network name and password, then click on continue.
    • After that, save and apply the configuration settings. Once setup has been completely successful, then restart your device.
    • Now you also have to place the Netgear range extender within the range of your main router. 
    • If in case, your device does not work, then you need to restart the device or factory reset the WiFi extender.

    Sum up

    Setting up the Netgear WiFi extender is not a complex task, it is more straightforward than you think. If you are unable to do this on your own, then follow the above comprehensive guide.

    Certainly, the above simple and easy guide will assist you with how to Netgear Wifi Extender Setup. To do the same, all you have to do is go through the above steps as given.

    So, before you ask for assistance from someone else, it is recommended to obey the overhead guide. This will help you with Netgear Extender Setup.

    If in case, you have less time to read and implement the given comprehensive guide. Then you can also try to get in touch with a Netgear expert. They will provide you with full assistance and also help you with the netgear Wi-Fi extender setup without wps.

    Netgear Wifi Extender Reset

    How to Reset Netgear Wifi Extender

    Netgear wifi extenders transmit wireless signals from the router or access point to the endpoint. These devices are designed to strengthen the signal from the router. It also allows it to travel further, and extend the range of the WiFi network. It is completed by using a set of antennas to receive and then rebroadcast the signal from the router, which helps to strengthen the signal and make it more reliable. This allows people to access the internet from farther away and in places that are not in the range of the router. Most of the time, it works perfectly, but sometimes it needs a Netgear wifi extender reset. In this article, we can discuss the reasons and solutions for reset Netgear wifi extender.  

     

    Reason for Netgear Wifi Extender Reset 

    There are various reasons for the Netgear wifi extender reset. One of the main reasons for needing a reset is if the extender is not connecting to the WiFi network or if the internet connection is not stable. It occurs because of an outdated firmware version or if the wifi settings are changed. Reset Netgear wifi extender can fix any connection issues you are facing. 

    It can also help if you are having trouble setting up the extender or if it isn’t working as expected. Resetting the extender also restores the default settings and helps you get the most out of your device. Here you can check out the various reasons for the Netgear wifi extender reset. 

     

    Troubleshooting 

    The factory default settings on your wifi extender can help you resolve issues such as poor performance, connectivity issues, or a device not working as expected. When you reset your device, the factory default settings are restored. It helps you to fix the various issues.

     

    Forgotten Login Credentials

    You can’t access the settings of your WiFi extender if you forget the login credentials. By resetting the device, you can reset your password and erase the login credentials. Resetting the device restores the default settings. This causes any forgotten passwords to be erased, allowing you to create a new password and access the settings. 

     

    Selling Or Giving Away The Device 

    It is a good idea to reset your wifi extender if you are selling or giving it away. You can access your personal information and settings. By resetting the extender, you can clear all your data and settings, such as your Wi-Fi password, so that the new owner cannot access them. This prevents the new owner from accessing your data or making changes to your settings. 

     

    Updating Firmware 

    You can update the firmware of the extender with a factory reset if you’re having trouble updating it. When there is a problem with the extender’s compatibility, a factory reset is helpful. A factory reset also removes the settings stored on the extender and allows you to reinstall the firmware with the latest version. This will ensure the extender is up-to-date and compatible with the router it is connecting to. Now you can quickly solve the issue and reset Netgear wifi extender. 

     

    Necessary Steps Before Netgear Wifi Extender Reset 

    It is common for Netgear Extender users to try to reset their devices smoothly, but not all of them are successful at it. For a successful Netgear WiFi extender reset, there are some precautions that one can take.  

    • Ensure that the extender is connected to a reliable power source.
    • When connecting your extender, do not use the extension cable.
    • When attaching your extender, do not use worn cables.

     

    A damaged or weak point can interrupt the connection. When the connection is interrupted between the reset process and the reset, the process is interrupted. The next option isn’t suitable for many users since it damages your router’s firmware or memory. 

     

    Switch On   Netgear Wifi Extender

    It is important not to interrupt the process of booting up the wifi extender once it is restarting. Interrupting the process can cause instability in the extender’s connection, resulting in poor performance and a decrease in the range of your wireless network. Netgear extender changes entail many changes, such as SSID Name, Password, and Settings, and it is important to note down all the changes. When you are finished resetting your extender, you need these credentials. Now you can easily reset Netgear wifi extender. 

     

    Methods For Netgear Wifi Extender Reset 

    You can use two methods for the Netgear wifi extender reset. 

    • Using Web
    • Manual Reset Button

    Both methods are simple, and you can complete the reset Netgear wifi extender quickly. 

     

    Manual Way to Reset Netgear Wifi Extender 

    Most users resetting their extenders during the off-state make a mistake, and we hope you won’t do the same. You can make sure that the extender you plan to reset is on before you begin. If you reset the device while it is off, you can’t access the settings, which need to be reset properly. It is important to make sure that the device is on so that you can go through the reset process correctly. 

     

    Search Factory Reset Button

    It is designed in such a way that the Factory Reset button is never accidentally clicked. When you are in a dark room or dark space, try using a flashlight to find the button on the back of the router. The button is usually recessed, making it harder to press accidentally. Additionally, it’s often located in an area on the back of the router that is hard to reach, further preventing accidental activation.

     

    Press Factory Reset Button On Your Extender 

    • Using a paper clip or a pointed object such as a pen, place it inside the hole.
    • Avoid applying too much pressure. You can break the button if you put too much pressure on it.
    • It takes a few seconds for the computer to boot up after pressing the reset button. 

     

     Release The Reset Button 

    • Upon seeing the extender light on, release the reset button.
    • Pressing the reset button for too long can damage your extender, and there’s a chance it freezes the whole process. 

    The extender light lets you know that your extender is reset itself and is ready to reconfigure. If the reset button is held for too long, it causes the extender to malfunction and become unresponsive. 

     

    Wait For the Complete Process of the Netgear WiFI Extender Reset 

    • A factory reset restarts the extender once it is completed.
    • To complete this process, make sure that the extender is connected to a reliable power source and is switched on at all times. 
    • Be sure that none of the lights on the extender are flickering before you turn off the power. 

    The process may take a few minutes to complete. Your Netgear Wireless Range Extender is now set up by going to the official Website. There is also a need to follow all the steps accordingly. 

     

    Using Web Browser For Netgear Wifi Extender Reset 

    You will need the following items to reset your Netgear extender:

    • An internet-connected laptop or computer
    • There is a need for an Ethernet cable.
    • You also have a Netgear wifi extender.

     

    Attach Your Device With Extender 

    Ensure a reliable power source is connected to the extender. Use an Ethernet cable to connect your device to the extender. Upon successfully connecting the extender to the device, Open your web browser and navigate to wifiext.net. This allows the extender to be configured properly and recognize the device, which ensures that the connection is secure and the extender is working properly. 

     

    Login to Website 

    • Upon turning on the extender,
    • Enter mywifiext.net or mywifiext. local as the URL for the website to set up your WiFi extender.
    • It is also possible to visit 192.168.1.250 if none of the above IP addresses work.
    • When you don’t change your Netgear extender credentials, a Netgear smart wizard appears.
    • You can enter your new login credentials if you change your default credentials previously. By default, Netgear extenders come with a preset username and password. When you change the default credentials, you are prompted to enter the new ones when the Netgear Smart Wizard appears.

     

    Go To Settings In Netgear Genie Wizard 

    To reset the extender, navigate to the Netgear Genie Wizard webpage and click the reset option. You usually find the reset button under the settings option, then click on another setting. The Netgear wifi extender reset restores the extender to its original factory settings and allows you to reconfigure it. This is necessary if you are having connectivity problems or want to change the extender’s settings. 

     

    Select Reset Option 

    • When you select the reset option, you can see a list of options. Click on Yes to verify it.
    • It restores the extender’s settings to their factory defaults once the process is complete.
    • The session on the website also ends, and you can log out.
    • A reboot of the extender occurs during the reset process.
    • You can’t turn off the extender until all the lights on it turn solid green.

    When the reset process is complete, you are ready to configure/set up your extender. You can accomplish this by following the extender setup guide. 

     

    Final Words 

    It is always important for users to reset Netgear wifi extenders if they are facing various issues. You can use the above methods for Netgear wifi extender reset. There is also a need to follow all the steps properly. Resetting the extender can help to fix any software glitches that may be causing the issues. It can also help to improve the performance of the extender by clearing out any corrupted data or settings that affect its performance. 

     

    Wavlink AC1200 Setup

    Complete Guide On Wavlink AC1200 Setup

    The Wavlink AC1200 wireless router offers fast speeds and reliable connections for multiple devices. It has two high-gain antennas to ensure a wide coverage area and stable connection. It also comes with a USB port for easy access to shared files. It is compatible with most wireless devices and is easy to set up and use. It also has a parental control feature to keep your children safe online. There is need to use the best method for Wavlink AC1200 Setup.

     

    You can easily complete Wavlink AC 1200 setup. Here we can discuss the whole process of setup so you can easily complete the setup and use them quickly. Make sure to carry out all steps as instructed. 

     

     WPS Method To Wavlink AC1200 Setup 

    It is imperative to know the process of Wavlink AC1200 setup. Here you can check the WPS method of setup.

    • You can connect your extender’s power adapter to a power outlet.
    • Make sure all wires are insulated.
    • A blue light indicates that the extender is powered on.
    • You can connect your WiFi router to the Wavlink extender.
    • Press the WPS button on both the router and the extender simultaneously.
    • For this step, both buttons need to be pressed together for two minutes.
    • Make sure the LED light is solid blue.
    • A solid blue LED indicates that the router and extender are both connected.
    • Extenders automatically boost wireless networks when they are connected. For both devices, the SSID and password will remain the same.
    • Using the same password, you will be able to log in.
    • After completing the Wavlink AC1200 setup process, you can use your device properly.

     

    Using a Web Browser for Wavlink AC1200 Setup 

    You can also use a web browser for the Wavlink AC1200 setup. It also depends on you as to which method you want to adopt. Let’s check out these steps for setup.

     

    • You will need to connect your Wavlink AC1200 device to the power outlet.
    • To repeat the connection, you will need to configure your device.
    • Navigate to the network settings on your laptop.
    • Connect to Wavlink N by finding the network. 
    • You can launch any web browser you choose and type 192.168.10.1 into the address bar.
    • A configuration page for the Wavlink AC1200 will appear.
    • You can now connect your home’s network to the extender by following the instructions on the screen.

    Now you can quickly use your Wavlink AC1200 setup. 

     

    Reset Method for Wavlink AC1200 Setup 

    Often, customers ask what the password is for their Wavlink AC1200 extenders. If you have not changed the password settings of your extender, you can use the default credentials. Passwords and usernames are both set to “admin” by default.

     

    When setting up their Wavlink AC1200, users often customize the password for their extender by logging into the configuration page. After they have written down this password, they forget it or lose the paper on which it was written. The most effective way is to reset your extender and log in again with default credentials. 

     

    Whenever we need to reset a router or extender, there are two ways to do so. There are two types of resets: hard and soft. You can perform a soft reset by logging into the extender’s admin page.

     

     Hard resets can be performed directly on the extender. To perform a hard reset, you need to press and hold the reset button for 10-20 seconds. This will reset the extender to its factory settings. After the reset, you can set up the extender again.

     

    When the extender’s factory settings need to be reset, there are a few circumstances that require this. When all other troubleshooting attempts fail, this is usually the last way to solve the issue. 

     

    • When users forget their extender admin password.
    • Your wifi router’s password is changed.
    • Changing the router requires reconfiguring it.
    • Extenders that keep disconnecting from wireless networks.

     

    Soft Reset of the Wavlink AC1200 Extender

    You can use the soft reset for your Wavlink AC1200 extender. 

    • You will need to attach your extender to the power outlet.
    • To connect to a laptop or desktop, either use WiFi or a LAN cable.
    • WiFi is also available for connecting your phone or tablet to the extender.
    • Open your device’s browser and type http://192.168.10.1 into the address bar.
    • After entering the default credentials, you will be redirected to the login page.
    • Use the new password if you’ve changed it.
    • Go to the Save/Reload Settings page after you have logged in. 
    • There is a need to reload the settings of your device to default mode to restore the factory configuration.

    After this, you will need to start the login process again.

     

     Hard Reset of the Wavlink AC1200 Extender

    You can also hard reset your Wavlink AC1200 extender, so follow the below steps. It takes a few minutes to complete the process. 

    • To power your extender, connect it to an electrical outlet.
    • There is a small reset button on the back of the extender.
    • For ten seconds, press and release the reset button with a needle or paperclip.
    • There will be a flashing of LED lights followed by a reboot of the extender.
    • A flashing light indicates that the rest of the process is completed and the factory default settings are applied.

     

    Final Words 

    It is a simple process of Wavlink AC1200 setup, so you can quickly complete the process. There is a need to use the WPS method or web browser for the setup process. It depends on you as to which method you want to adopt.  

    Netgear Access Point Setup

    Netgear Access Point Setup

    Netgear Access Point is a device that enables a wireless connection between a router and other devices. It extends the range of a wireless network, allowing users to access the Internet from a greater distance. It also provides additional security features, allowing users to restrict access to a network. Now it is easy to install and configure and can be used to create a secure, reliable, and fast wireless connection.

    It is a cost-effective way to extend the range of a wireless network and is ideal for homes and businesses. Additionally, it can be used in areas where traditional wired networks are difficult or impossible to install, such as in multi-story buildings or rural areas. It is also scalable and can be used to expand a network as the number of users and devices increase. 

    It is also crucial to know about the Netgear access point setup. Connect the Ethernet cable from the router to the access point. Power on the access point and connect to it with a laptop or mobile device. Access the access point’s web-based setup page and configure the settings. Here we can discuss in detail of Netgear access point.

     

    Check the IP Subnet of the Existing LAN

    Your AP’s default IP address is on a sticker on the back or bottom. An AP with a default IP address in a different subnet from your LAN network will need to have its IP address changed. There is a need to check the IP subnet of the existing LAN. You can check out these steps.

    • An existing LAN can be used to connect a computer. Ensure that you have internet access.
    • Using the Windows command prompt, open a command window. It varies depending on the Windows version, but you click the Start button and type cmd into the Search programs and files box.
    • Using the command prompt, type ipconfig. Take note of your subnet mask and default gateway in the resulting output. 

    You can also check out these on Mac devices, so there is a need to read all the instructions in the manual properly. 

     

    Configure a Static IP Address on Your Computer

     

    It is also necessary for you to configure a static IP address on your computer. Let’s check the below points.

    • A temporary IP address in the same subnet as the AP default IP address will be required to configure the access point.
    • Change adaptor settings by going to Start > Control Panel > Network and Internet > Network and Sharing Center.
    • To connect to a local area network, double-click it.
    • After this, you can tap on properties.
    • Click here to highlight the Internet Protocol Version 4 (TCP/IPv4).
    • There is a need to set the IP address of your computer to 192.168.0.210 and the Subnet mask to 255.255.255.0.
    • By using an Ethernet cable, connect the computer directly to the AP.  
    • You will need to open an internet browser. Type the IP address of your AP (for example, 192.168.0.100) in the address bar of your browser.  

    After this AP login screen appears, you can log in using the default username and password. Here the username is admin and the password is password.

     

    Change the IP address of the Access Point

    AP configuration interfaces differ from model to model so it is necessary to change the IP address of the access point in the process of Netgear access point setup.

    • If you are using the latest models, tap on Configuration > IP.
    • If you are using the old models, then tap on IP settings.
    • A DHCP server (usually the router) can provide the IP address to the AP if you select DHCP Client Enable. 
    • Here you can tap on Apply. To ensure that the AP always gets the same IP address, you should also configure a DHCP Reservation on the DHCP server. The AP interface will be easily accessible once it has been connected to your network. 

    You can also set manually the static IP address of the AP by following the below steps.

    • Make sure to choose an IP address that is not in use and is not in a DHCP server’s range (scope). 
    • Your network’s IP address and Subnet Mask are set accordingly.
    • You can leave the default gateway address blank, or fill it in with the default gateway address for your network.
    • There is a need to select an IP address that is not currently in use and also outside of the range and scope of the DCHP server of the network.
    • Here it is necessary to set the IP address and subnet mask according to your network.
    • It is also vital to leave blank the default gateway address or you can also enter the default gateway address of your network. 
    • It is possible to leave the DNS server addresses blank or to fill them in with the DNS addresses for your network. Most of the time, the primary DNS corresponds to the default gateway, while the secondary DNS is blank. 

     

    After the Netgear access point setup there is a need to attach AP to the existing network. Your existing network is connected to the AP after disconnecting the Ethernet cable. 

     

    Final Words 

    When you complete the process of Netgear access point setup then you can use the AP is easy. It is also necessary to follow all the steps accordingly and complete the setup process of AP.